Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | Tiszta69  | | Posted: | May 18, 2024 17:02 | | Subject: | parts 47986 and 47980 description | | Viewed: | 10 times | | Topic: | Catalog | | Status: | Open | |
|
| part 47986 description contains "16 x 22", however it is 15x22
part 47980 description contains "19 x 2", however it is 19x22
(I hope this is the right place to give this feedback  )
|
 |
| Author: | minifigmountain | | Posted: | May 18, 2024 02:30 | | Subject: | First new item submissions | | Viewed: | 65 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello all,
I'm sure the answer is "just be patient", which is fine, but I wanted
to make sure I didn't do anything wrong with my submission of 5 new stickered
parts that were not previously in the catalog.
https://www.bricklink.com/catalogList.asp?itemPend=Y&uID=1913652
My pending submissions are here. There are also photos submitted separately to
go along with those items. Again, just making sure there's no glaring error
I committed and somehow these requests would go unnoticed forever. If there's
any way to tell just based on the pending entires.
Thank you for your replies and hopefully this will be the first round of many
future submissions!
-Steve
|
|
| Author: | b.b.beyond | | Posted: | May 17, 2024 22:31 | | Subject: | Ant Trooper, Super Mario, Series 4 (Complete) | | Viewed: | 50 times | | Topic: | Catalog | | Status: | Open | |
|
| The form returns an error when I try to submit, but Item No: char04-6 Set Ant
Trooper, Super Mario, Series 4 (Complete) weighs 16g. Thanks!
|
| Author: | Saitobricks.ca | | Posted: | May 14, 2024 12:12 | | Subject: | Why is this wrong?! | | Viewed: | 186 times | | Topic: | Catalog | | Status: | Open | |
|
| How can the weight be known for this?!
|
|
| Author: | Thargor | | Posted: | May 14, 2024 07:45 | | Subject: | Clone Shadow ARF Trooper sw0315 Head question | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
|
| I have a question to the community. In the catalog the head for the Arc Trooper
sw0315 is listed with Blocked Open Stud. In my polybag (still sealed) the head
is a Hollow Stud.
Is the listing wrong? or did Lego issue this minifigure with both head types,
as often seen with minifigures in regular sets?
|
|
| Author: | infinibrix | | Posted: | May 12, 2024 12:09 | | Subject: | Sam Kerr Minifigure using wrong hair design?? | | Viewed: | 106 times | | Topic: | Catalog | | Status: | Open | |
|
| I've just had a customer complain that my Sam Kerr isn't genuine?
However whilst its accurate as per Bricklink and Brickset it seems the set comes
with alternate hair pieces and whilst it may seem okay to use either it really
ought to match with the instructions which actually use:-
The promotional images of Sam Kerr holding the minifig also show it with this
hair design:-
https://jaysbrickblog.com/news/lego-40634-lego-icons-of-play-and-play-unstoppable-campaign-revealed/
|
|
| Author: | kotofey1611 | | Posted: | May 12, 2024 05:09 | | Subject: | Counterparts 80007-1 | | Viewed: | 51 times | | Topic: | Catalog | | Status: | Open | |
|
| Good afternoon. Is it possible to identify these counterparts of the 80007-1
set? Thank you.
|
|
|
| Author: | guccidalto | | Posted: | May 10, 2024 16:01 | | Subject: | No poc030 minifig | | Viewed: | 103 times | | Topic: | Catalog | | Status: | Open | |
|
| Just wondering if anyone knew why there is no Pirates of the Carribean minifig
no. poc030. Seems like an error, or maybe it was on purpose? Just wanted to see
if anyone had insight.
|
| Author: | jmkiska | | Posted: | May 6, 2024 07:24 | | Subject: | Complete List of Merged Part Variants | | Viewed: | 113 times | | Topic: | Catalog | | Status: | Open | |
|
| Is there a complete list of all of the part variants that were merged back in
February? I have seen the "Variant Project - overview" page. It states
how many items will be affected in the different examples, but doesn't list
all of the exact items that were affected by the merge. I'm trying to build.a
cross reference table so I can update several older MOCs that may contain the
older item numbers.
|
|
| Author: | TheJerminator | | Posted: | May 5, 2024 19:13 | | Subject: | Should a legless Meca One entry be added? | | Viewed: | 113 times | | Topic: | Catalog | | Status: | Open | |
|
| In Set 7707-1 Striking Venom, Meca One is not currently considered a minifigure
on BrickLink, presumably due to the fact that he does not have legs and is kind
of "built into" the larger Striking Venom model (Page 48, Step 31.13).
However, the same goes for all the other Iron Drones in the set and yet they
are considered minifigures.
Additionally, the legless Meca One is assembled at the start of the instructions
with all the other minifigures in the set, and is added to the larger build without
a part callout (again, also like the Iron Drones, on Pages 28 and 35).
It seems to me like the Meca One half-figure included in Striking Venom should
be considered a minifigure. Is there any reason that it is not?
|
|
| Author: | wyvern | | Posted: | May 4, 2024 09:17 | | Subject: | Baby Animals | | Viewed: | 98 times | | Topic: | Catalog | | Status: | Open | |
|
| Should "Owlet" be added to this name?
Like how these have "Kitten", "Cub", "Piglet", "Foal",
and "Calf" in theirs:
(also maybe add "Baby Pig", "Baby Horse", "Baby Cow",
and "Baby Owl" to their respective names?)
|
|
| Author: | Nubs_Select | | Posted: | May 3, 2024 20:50 | | Subject: | Din Grogu set 75378 new PCC | | Viewed: | 107 times | | Topic: | Catalog | | Status: | Open | |
|
| I'm working on the inventory for set and the body for Din Grogu
has a new PCC. comparing the 2 images I can't tell if its a new pattern or
just printing variation. should I add a new entry or just add the new PCC? In
image 2 I drew arrows pointing to some different areas along with some lines
to show the height difference of the one line
|
|
|
| Author: | TheJerminator | | Posted: | May 3, 2024 19:31 | | Subject: | Missing stickered part from Set 7706 | | Viewed: | 83 times | | Topic: | Catalog | | Status: | Open | |
|
| I notice that the current inventory for Set 7706-1 Mobile Defense Tank is missing
the two white 2x2 round bricks with stickers from the sides of the vehicle. It
looks like the part does not currently have a catalog entry, either.
The stickers are applied on Page 31 of the instruction manual (Sticker 16, Step
22.3). I cannot add a catalog entry for these stickered parts myself because
I don't own the set or stickered parts.
|
| Author: | rainbowmist | | Posted: | May 3, 2024 11:45 | | Subject: | Inventory Change Request for Set 60229-1 | | Viewed: | 30 times | | Topic: | Catalog | | Status: | Open | |
|
| Add a stickered part to inventory 60229-1.
Add 2 30413 Dark Blue with Solar Panel Sticker.
Thank you.
|
|
|
| Author: | Ziegelmeister | | Posted: | Apr 30, 2024 16:01 | | Subject: | Does part 10202 need a note? | | Viewed: | 125 times | | Topic: | Catalog | | Status: | Open | |
|
| Normally I wouldn't think twice about this, but I just packed and shipped
an order for a bunch of tiles ranging from 1x1 to 6x6. If you're not aware
the, the 6x6's have a matte finish quality to them that almost resembles
a 4x3 slope rather than the high gloss you come to expect from, say, 2x6 tiles.
Should there be a note attached to 10202 mentioning this? If this particular
buyer is intending to have these seamlessly blend in with the other tiles they
bought, they're in for a bad surprise unless they are already familiar with
the part.
|
|
| Author: | ccroxton | | Posted: | Apr 29, 2024 22:22 | | Subject: | New part added | | Viewed: | 81 times | | Topic: | Catalog | | Status: | Open | |
|
| Thanks for adding the new part! The set number is in the description, but the
set is not linked, and the part does not appear in the set inventory.
|
| Author: | razorflan | | Posted: | Apr 27, 2024 17:00 | | Subject: | Adding a part to the catalog | | Viewed: | 89 times | | Topic: | Catalog | | Status: | Open | |
|
| I want to add this sticker part to the inventory of set 70813 rescue re-enforcements.
I want to contribute to the catalog but just find it too complicated to understand.
For some reason the image here has loaded sideways and need's to be rotated
to the right. The next available part number is 892pb039
|
|
| Author: | batman11223 | | Posted: | Apr 27, 2024 09:03 | | Subject: | finding next sequential number | | Viewed: | 89 times | | Topic: | Catalog | | Status: | Open | |
|
| Can someone please help me with tips on how to find the next sequential number
on patterned parts? I have been spending a long time trying to find this
|
| Author: | batman11223 | | Posted: | Apr 26, 2024 20:27 | | Subject: | saving progress? | | Viewed: | 95 times | | Topic: | Catalog | | Status: | Open | |
|
| When you edit the items when entering an inventory, is there a way to save progress
so that you dont have to do it all in one sitting or risk losing all your progress?
|
| Author: | batman11223 | | Posted: | Apr 26, 2024 18:23 | | Subject: | rendered items | | Viewed: | 88 times | | Topic: | Catalog | | Status: | Open | |
|
| im new to this but am parting out the D&D set. How does one find a rendered image
for parts?
|
|
| Author: | jul9000 | | Posted: | Apr 25, 2024 16:19 | | Subject: | Doubts on the latest Star Wars promo item | | Viewed: | 160 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
Today I acquired the latest "25 Years of Lego Star Wars" promotional
item and I'm having doubts on correct categorisation.
The packaging says: "Fabric Sticker", but the item looks more like a
patch, rather than a sticker. Also, it's made of fabric, not sewed, like
patches usually are, and not paper, as sticker usually are.
That being said, I have doubts how to correctly add the item to the catalog.
What do you guys think? Does it belong to "Sticker, Collectible Sticker"
category, or "Patch & Pin"? Please also suggest an Item ID, as this isn't
obvious neither in both those categories...
Attaching two photos of the actual item
|
|
|
| Author: | Autism_And_I | | Posted: | Apr 25, 2024 12:33 | | Subject: | Can't add catalog information to Instructions | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
|
| Which preset am I supposed to select when submitting a change request for instructions?
I assumed it was just the Catalog one.
However when submitting it tells me; "Item No to Change does not exist in
Catalog."
I am copy/pasting them Item No from the existing entry.
I've tried changing to Book rather than Catalog as well as attempting to
change the Item No by removing both the -1 and "Instructions Entry" Text.
I did not expect these to work and indeed they did not.
Looking at the Catalog Add or Change menu, there is an option for instructions
under Add Image but not under Change Item.
I just wanted to submit weight and dimensions for an instruction manual.
Perhaps I am missing something. But the guide just leads to the same Change Item
form, which is where I started.
|
|
|
| Author: | Shintaku | | Posted: | Apr 25, 2024 04:08 | | Subject: | Many errors in the catalog | | Viewed: | 148 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
probably I'm not the first person to point this out but there are a lot of
2x2 printed tiles listed in the wrong way.
I suppose the part code is 3068b, so all the printed tiles should be 3068bp*,
but many are 3068pb*
Like : https://www.bricklink.com/catalogItemIn.asp?P=3068pb2361&in=S
I believe that this is an error.
Can you confirm me?
Because when searching 3068bp*, as it should, many do not appear.
|
| Author: | andreaseldh | | Posted: | Apr 22, 2024 16:39 | | Subject: | Large img 6475686 German Braille Instruction | | Viewed: | 71 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello!
I did not succeed uploading this large scale image to the catalog, but it seems
to be possible with this message!
Play well!
Andreas Eldh
|
|
| Author: | sometom | | Posted: | Apr 21, 2024 23:34 | | Subject: | Catalog Error (Self-Consistency issue) | | Viewed: | 62 times | | Topic: | Catalog | | Status: | Open | |
|
| Set 76416 Inventory shows part 22385 in Green, but no such item in Dark Green.
This is consistent with the Lego instructions posted on Lego.com, since the
set includes one 6290600 according to the instructions.
The derived item with a sticker, 22385pb304, also in the inventory of that set,
claims it is Dark Green. I believe this needs to be updated to be Green.
|
|
| Author: | Kumquat23 | | Posted: | Apr 21, 2024 13:13 | | Subject: | Unsuccessful add item attempt? | | Viewed: | 63 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
On the 19th I tried to add a stickered item to the catalog, and I added an image.
Should those appear in the forum, and if not, does it mean that my request did
not go through?
I was trying to add part 45677pb161 (I can't remember the exact number at
the end, but I looked at recent sticker numbers from that part number and chose
the next one) from D.Va & Reinhardt set 75973. It seemed like it allowed me to
submit it and to submit the image. Just double-checking Jennifer's link
explaining how to upload stickered parts was super helpful!
Thanks,
Beth
CA Brick Shop
|
|
| Author: | Nathan123 | | Posted: | Apr 21, 2024 06:38 | | Subject: | Do misprinted pieces get catalog entries? | | Viewed: | 104 times | | Topic: | Catalog | | Status: | Open | |
|
| Do misprinted pieces get catalog entries? I understand misprinted pieces happen
often however if a misprint is listed under a non misprinted item then it doesn't
really reflect the item.
|
|
| Author: | ZELDATOTK | | Posted: | Apr 20, 2024 19:41 | | Subject: | Help identify a Lego part and color | | Viewed: | 98 times | | Topic: | Catalog | | Status: | Open | |
|
| | What is this Lego part can someone help |
|
| Author: | attadeus | | Posted: | Apr 20, 2024 05:27 | | Subject: | pi198 and pi199 | | Viewed: | 100 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi there,
Do we have more informations about the set they came from?
As I know, recently added pi198 and pi199 minifigures didn't appears in any
official Lego sets. The specific torso is well-know to be part of some pirates
keyrings that already have been inventoried here on Bricklink few years ago :
The torsos are, in my opinion, unused keyring torsos. I also own these torsos
Regards.
|
|
| Author: | Bond | | Posted: | Apr 19, 2024 20:28 | | Subject: | 553b | | Viewed: | 91 times | | Topic: | Catalog | | Status: | Open | |
|
| During parting out and adding to my inventory this set:
I noticed that 553b (aka Brick, Round 2 x 2 Dome Top, C = Magenta or 71) is without
either catalog entry or image. I was about to submit a Cat Change Request and
then I remembered the ongoing headaches regarding the Variant Project as detailed
in this message:
https://www.bricklink.com/message.asp?ID=1451828
So, is the image and entry merely and temporarily 'down' due to Variant
Project implementation? Or is 553b entry actually gone-gone and a CCR needs
to be completed in order to make 553b part of 553? Note that there are currently
only two catalog entries for Brick, Round 2 x 2 Dome Top. One is while
553a is listed as "without Bottom Axle Holder".
FWIW, the 553 in Set 11022 has a blocked open stud.
I'm uncertain what action to take, or if I even should.
- B
|
|
| Author: | The_Boyz_Bricks | | Posted: | Apr 19, 2024 19:23 | | Subject: | Add item | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello all! Does anyone know how long it takes for a new item to be approved to
the catalog? For instance I added a few snickered parts for the Lego Ideas Tribute
to Galileo Galilei this afternoon. How long will it take to get approved?
Thanks all!
|
| Author: | shonboi | | Posted: | Apr 17, 2024 21:38 | | Subject: | Set 42044, part 42044stk01 alternate part # | | Viewed: | 49 times | | Topic: | Catalog | | Status: | Open | |
|
| Part number 42044stk01, sticker sheet for set 42044. Please add alternate item
number 24672/6134420
|
| Author: | shonboi | | Posted: | Apr 17, 2024 21:31 | | Subject: | Set 60071, part 60071stk01 alternate part # | | Viewed: | 34 times | | Topic: | Catalog | | Status: | Open | |
|
| Part number 60071stk01, sticker sheet for set 60071. Please add alternate item
number 19445/6099713
|
| Author: | shonboi | | Posted: | Apr 17, 2024 21:21 | | Subject: | Set 60110, part 60110stk01 alternate part # | | Viewed: | 33 times | | Topic: | Catalog | | Status: | Open | |
|
| Part number 60110stk01, sticker sheet for set 60110. Please add alternate item
number 24518/6133148
|
| Author: | shonboi | | Posted: | Apr 17, 2024 21:19 | | Subject: | Set 70323, part 70323stk01 alternate part # | | Viewed: | 35 times | | Topic: | Catalog | | Status: | Open | |
|
| Part number 70323stk01, sticker sheet for set 70323. Please add alternate item
number 26712/6152338
|
| Author: | shonboi | | Posted: | Apr 17, 2024 21:13 | | Subject: | Set 70738, part 70738stk01 alternate part # | | Viewed: | 51 times | | Topic: | Catalog | | Status: | Open | |
|
| Part number 70738stk01, sticker sheet for set 70738. Please add alternate item
number 21059/6112822
|
| Author: | Nathan123 | | Posted: | Apr 17, 2024 02:26 | | Subject: | Attach 973pb0280c01 to set 10040 | | Viewed: | 73 times | | Topic: | Catalog | | Status: | Open | |
|
| As title says can be attached to set
I recently purchased a used copy of the reissued Black Seas Barracuda and this
torso was there, also the torso has a modern underside and that is in common
with all the figures that came with the re-released set.
|
|
| Author: | here4bricks614 | | Posted: | Apr 16, 2024 21:22 | | Subject: | Please add note | | Viewed: | 73 times | | Topic: | Catalog | | Status: | Open | |
|
| To the following parts:
“The rust version of this part is actually LEGO color 13 Red Orange, a color
not recognized on BrickLink.”
|
| Author: | jice | | Posted: | Apr 16, 2024 14:27 | | Subject: | 783 storage case with packaging | | Viewed: | 76 times | | Topic: | Catalog | | Status: | Open | |
|
| I was able to find this case I had as a child for sale on Facebook. It has the
original packaging including a price tag from Farm and Fleet.
|
|
|
| Author: | nando10081969 | | Posted: | Apr 15, 2024 05:11 | | Subject: | Part 3001old or 3001special? | | Viewed: | 137 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello all Bricklinkers!
I found this 2 x 4 brick, in pink color (I guess...) without cross supports.
In the 3001old entry, there are no pink parts. However, I can find it at the
3001special entry (special bricks, test bricks and/or prototypes). The thing
is, all the pictures in this entry have a letter on the studs (f, c, etc). My
part have a old 'lego' logo printed on the studs. Is this still a 3001special?
Or is another kind of 3001 brick that I can't find?
Thanks in advance for your help!
(An yes, the part needs a serious bath ... )
|
|
|
| Author: | custommike | | Posted: | Apr 14, 2024 16:30 | | Subject: | 30118pb03 - Add known color - Light Gray | | Viewed: | 82 times | | Topic: | Catalog | | Status: | Open | |
|
| Picture on the catalog is of a light gray piece but no known color information
is listed.
|
| Author: | rsijmons | | Posted: | Apr 14, 2024 12:12 | | Subject: | Set 44042 - New Slope, Curved, Decorated | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
|
| There are 2x decorated pieces 93273 in set 40442
I've only got a photo of one (found in job lot).
Can someone add this one to the catalogue?
Thanks
Regards
|
|
| Author: | Saitobricks.ca | | Posted: | Apr 13, 2024 17:23 | | Subject: | 42163 extra parts | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
|
| Just bought one copy of the set and received 3 spare,
Should I make a inventory change request?
|
|
|
| Author: | Leftoverbricks | | Posted: | Apr 12, 2024 11:38 | | Subject: | Movements in Item Type and Category #7 | | Viewed: | 77 times | | Topic: | Catalog | | Status: | Open | |
|
| Today we received this update of items that were moved to another category:
https://www.bricklink.com/help.asp?helpID=2599
I strongly object to the movement of below parts to the Arch category.
and
The definition of an arch according to the Oxford dictionary is:
a curved symmetrical structure spanning an opening and typically supporting
the weight of a bridge, roof, or wall above it.
Neither of those parts fulfil that description. They do not span an opening.
They maybe help to raise an adjoining element.
This becomes more obvious if you look at the 39 parts that are now categorized
as Arch.
There are exactly two parts that don't look like any other part in this category,
the other 37 parts do.
See picture below or this link: https://www.bricklink.com/catalogList.asp?catType=P&catString=6
I strongly suggest to undo the movement since it is not at all logical, not following
the definition of an arch and certainly doesn't a help a user to search for
an item like 4190 or 73682.
My suggestion is to move these items to Plate, Modified or Tile, Modified.
Please support my suggestion by replying with an upvote -- no need to cite
my post, just say +1
|
|
|
| Author: | Give.Me.A.Brick | | Posted: | Apr 11, 2024 10:27 | | Subject: | Stickers Package Type | | Viewed: | 95 times | | Topic: | Catalog | | Status: | Open | |
|
| Sorry if I have missed something, but who and why is changing Stickers Package
Type from Weight To Volume Bound thus making Instant Checkout unavailable?
Thank you.
|
| Author: | Darthdad5740 | | Posted: | Apr 10, 2024 17:05 | | Subject: | new vs used | | Viewed: | 217 times | | Topic: | Catalog | | Status: | Open | |
|
| What is new vs used??? Is new in a sealed box and/or just opened??? Is it used
if its opened by the original owner??
|
| Author: | Saitobricks.ca | | Posted: | Apr 9, 2024 21:30 | | Subject: | Add fig for MetalBeard's Sea Cow set 70810 | | Viewed: | 84 times | | Topic: | Catalog | | Status: | Open | |
|
| Please add Metalbeard figure for set
|
| Author: | brunocandeias | | Posted: | Apr 9, 2024 07:04 | | Subject: | HELP! | | Viewed: | 177 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello!!
I have this part 30530 and it has molded in the bottom "3 - 01"
I'm not sure if it is authentic or not...No LEGO mold...
Thanks and Regards!
|
|
|
| Author: | SezaR | | Posted: | Apr 7, 2024 19:28 | | Subject: | additional note: weight of Box of set 646-1 | | Viewed: | 40 times | | Topic: | Catalog | | Status: | Open | |
|
| Souce: sealed set (European version). It was 66gr (not 55gr that was a typo).
I note that the weight of Canadian box is about 10-11gr more. Checked this with
two copies of European box and two copies of Canadian box. Though, the size of
boxes are exactly the same and they look identical, besides the extra prints
on the Canadian box.
So
The weight of empty Canadian box: 28gr
The weight of empty European box: 18gr
The weight of Canadian complete set with box and instruction (and considering
1gr extra for a mini catalog): 76gr
The weight of European sealed set: 66gr
Please add these as additional note.
If time permits, I add photos of both boxes.
|
|
| Author: | Nubs_Select | | Posted: | Apr 6, 2024 18:02 | | Subject: | Question about Undetermined as alternates | | Viewed: | 87 times | | Topic: | Catalog | | Status: | Open | |
|
| While I was working on cleaning up part
I came across multiple sets such as where they have the undetermined
as a normal entry and then have a solid/hollow version as an alternate in the
set.
for example set
has
as a regular part with match ID 10
then has
as an alternate with match ID 10
but when watching a new build of the set it has
then there are sets like
where
with match ID 3 in the main section and
with match ID 3 is listed as an alternate.
so I'm a little confused as to how to handle these ones. when alternates
are the main part in the inventory and the a or b is in the alternates or when
a or b is in the main inventory and the undetermined version is listed as an
alternate is this something that happened when the part was separated? I dont
really know what to do with these
Thanks!
-Jason
|
|
| Author: | Ra | | Posted: | Apr 6, 2024 08:15 | | Subject: | 4066pb086 image flipped? | | Viewed: | 92 times | | Topic: | Catalog | | Status: | Open | |
|
| All the set images show the four nails on the right side and two on the left.
The image appears to be reversed. I'm a bit tired anyone else see the same
thing
|
| Author: | rprebel | | Posted: | Apr 2, 2024 08:14 | | Subject: | How long does it take for approval? | | Viewed: | 103 times | | Topic: | Catalog | | Status: | Open | |
|
| I added something to the Toy, Early database on January 20th and it's still
sitting there. I have one of these items which I might want to sell, but I can't
because my post is still sitting there unapproved and seemingly un-looked at.
I have photos of some surviving examples, I have dates of availability on the
original set... what's the hold up?
|
| Author: | bricktopiausa | | Posted: | Apr 2, 2024 07:07 | | Subject: | please add new color Trans Dark Blue for 3022 | | Viewed: | 118 times | | Topic: | Catalog | | Status: | Open | |
|
| Looks like Lego had a workshop that you could build snowflake tree ornaments
and they had 3022 Plate 2 x 2 in trans-dark blue as part of that event. Guess
they were allowed to build and take with them.
|
|
|
| Author: | Gamorreaner | | Posted: | Mar 29, 2024 14:27 | | Subject: | Super Model sets | | Viewed: | 123 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
I think there is something wrong with how super model sets are treated in the
catalog. I use this site in many different ways and buying stuff is just one
of those ways, another way would be to look for part lists to rebrick sets and
when it comes to super sets its quite sad that you have to either look for the
parts of the main sets, which means including lots of parts you dont really need,
or just go with the instruction and ignore bricklink as a helping hand in finishing
them - which I think right now is the better way...sadly.
I recently rebricked M-Tron Secret Space Voyager
https://www.bricklink.com/v2/catalog/catalogitem.page?S=6862-1#T=S&O={%22rpp%22:%22100%22,%22iconly%22:0}
and now i will start Blacktron II Super Vehicle
https://www.bricklink.com/v2/catalog/catalogitem.page?S=6861-2#T=S&O={%22iconly%22:0}
I think there should be lot of other sets with the same problem. It is not very
helpful for people who want to rebrick those, it they can't access a part
list.
Greetings
|
|
| Author: | CykillsGarage | | Posted: | Mar 27, 2024 20:05 | | Subject: | There seems to be an error with this listing. | | Viewed: | 121 times | | Topic: | Catalog | | Status: | Open | |
|
| HI there, I was browsing the catalog listings for the Darth Vader helmet type
2 on the BL, and I noticed that there appears to be a problem with the both listing
of the helmet and collar. 19916 and 19917 both appear to have a trans green-clear
option!? is this a listing for a test shot or something? any help would be appreciated.
|
| Author: | Saitobricks.ca | | Posted: | Mar 26, 2024 16:41 | | Subject: | How to make items uninventorable | | Viewed: | 86 times | | Topic: | Catalog | | Status: | Open | |
|
| Looking through a big list of books that have no items in them, but they are
in the list of items missing a inventory.
Is there a way to add these to the list of items that can't be inventoried?
|
| Author: | sandman | | Posted: | Mar 24, 2024 12:34 | | Subject: | Another newline at the end of an item name | | Viewed: | 116 times | | Topic: | Catalog | | Status: | Open | |
|
| ...which totally breaks the CSV catalog download.
This time it is the freshly added
|
| Author: | Max.Brix | | Posted: | Mar 24, 2024 06:10 | | Subject: | 70656 parts with stickers | | Viewed: | 82 times | | Topic: | Catalog | | Status: | Open | |
|
| The parts with stickers for set 70656 have not yet been uploaded.
I have no idea how to do this? Anybody?
|
| Author: | Saitobricks.ca | | Posted: | Mar 23, 2024 11:00 | | Subject: | Uninventorable sets | | Viewed: | 169 times | | Topic: | Catalog | | Status: | Open | |
|
| Was looking at the catalog page and noticed a link for unreleased items.
Then I noticed this set was in it.
Why are you not allowed to inventory it?
|
|
| Author: | WildBricks | | Posted: | Mar 22, 2024 11:30 | | Subject: | 3626bpx326 eyebrows? | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
|
| I have come across a lot of these skeleton heads, but for some reason never realized
before that they are supposed to have eyebrows. I don't think I have ever
once seen 1 with printed eyebrows. Is this a common misprint?
|
|
| Author: | sasquatch_eater | | Posted: | Mar 21, 2024 13:30 | | Subject: | Cole Minifigure. | | Viewed: | 99 times | | Topic: | Catalog | | Status: | Open | |
|
| Would anyone like to volunteer to add an image of the new Ninjago Cole Minifigure
from the set Arin's Ninja Off-Road Buggy Car (71811) which came
out on March 1st? I added it to the catalog, but sadly I can't get a good
picture of it.
This is a link to my catalog submission:
https://www.bricklink.com/v2/catalog/catalogitem.page?M=njo887#T=S&O={%22iconly%22:0}
Thanks very much in advance.
|
|
| Author: | joshbeagrie | | Posted: | Mar 18, 2024 18:46 | | Subject: | LEGO House Tile | | Viewed: | 159 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi all,
I have discovered that the LEGO House Tile has 2 versions, see below.
Appeared in sets 40502, 40501, 4000010 and 21037, with PCC 6089148.
And it was updated to:
And this newer version appears in sets 40503, 40563, 40504 and 40505, with PCC
6320270.
Once the newer tile has been approved I will update the set inventories above
accordingly, and add a relationship between the 2 tiles.
I have put in a request for the version currently in the catalogue to change
it's name and remove it's second PCC.
Any questions just let me know!
Thanks,
Josh
|
|
|
| Author: | Lord_Barthon | | Posted: | Mar 18, 2024 09:25 | | Subject: | Requests | | Viewed: | 148 times | | Topic: | Catalog | | Status: | Open | |
|
| Good afternoon everyone,
Quite new with all the catalog requests:
I added three new rare pieces I would like to sell. It's been quite a while
now and nothing has happened.
Is there a way to ask someone kindly to proceed with the upload?
I cannot sell these beautiful cloth patches until someone uploaded the items.
Greetings.
Barthon
|
|
| Author: | jul9000 | | Posted: | Mar 18, 2024 08:06 | | Subject: | New Ninjago minifigure? | | Viewed: | 113 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
This is regarding my new minifigure submission (njo884x; althought I'm not
the one who added the "x" ).
The minifigure was included in "b24njo02pl". The Polish title and multiple
mentions inside the book suggest a "hunter", although the English publisher
site (https://www.ameet.eu/book/lego-ninjagoempire-warrior/) mentions the following
names:
- "Imperium Warrior" (on the cover)
- "Imperium Hunter" (in the description)
- "Dragon Hunter no 29" (multiple mentions inside the book, can also
be found among book pictures on publisher's site)
Parts wise:
- torso, legs, head and helmet are the same as in njo815 ("Imperium Claw
General" )
- the only difference between this minifigure and njo815 is the lack of "Black
Minifigure Armor Shoulder Pads Spiked with Stud on Back"
- a "Imperium Claw Hunter" (njo817) is already known, but has different
set of torso, legs and helmet
Please advise how to correctly add this minifigure.
Thanks in advance for your help!
Best,
|
|
|
| Author: | SWIMS | | Posted: | Mar 16, 2024 13:19 | | Subject: | Reference weight of small pieces like 98138 | | Viewed: | 86 times | | Topic: | Catalog | | Status: | Open | |
|
| Is it possible to add a decimal for the reference weights for pieces (or at least
optional for very small pieces like the 1x1 round tiles (id 98138).
In the catalogue there is a 0.11g but I assume it is something just rounded up
to 0.11g (not sure the correct number.
Background id that I thought that checking a delivery (or simply counting stock
of a higher number) is much more efficient by checking the weight. Then I checked
my last order which just arrived of supposed 3100 pieces but the overall weight
was 320g. So either the weight is more like 0.10322g (then als 0.11g would be
rounded wrong) or I received significantly less items.
So I guess I will need to manually count quiet some to have a good sample estimation
myself
Or does anyone know out there how much 1000 or 10'000 of these should weight?
|
|
| Author: | antant7 | | Posted: | Mar 16, 2024 08:26 | | Subject: | 30388pb015 breaks the part catalog download | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
|
| Dear catalog admins,
part 30388pb015 seems to have extra line breaks at the end of the part name,
which appear in the tab delimited download and break the formatting.
My guess may be wrong but the Parts.txt export file currently looks like the
attached image.
I tried using the Change Item form but the name of the part is too long and won't
fit in the name field.
If you could have a look at this, it would be appreciated.
Regards,
Antonios
|
|
| Author: | Bond | | Posted: | Mar 14, 2024 18:15 | | Subject: | Magnifying Glass Dilemma | | Viewed: | 132 times | | Topic: | Catalog | | Status: | Open | |
|
| The attached image should paint the entire picture. Thank you in advance for
your counsel.
- Bond
|
|
|
| Author: | JaccoKik | | Posted: | Mar 14, 2024 15:47 | | Subject: | Lego colors | | Viewed: | 93 times | | Topic: | Catalog | | Status: | Open | |
|
| Goodevening everyone,
Is it possible to get Lego parts in other colours than I could find by Lego?
For example I see at the Rebricable website much more colours of part 2780 than
I could find on the Lego website. Is it possible to get this parts in RAL6024?
Best regards,
Jacco Kik
|
| Author: | lcgs13 | | Posted: | Mar 14, 2024 06:03 | | Subject: | 3022 Colour | | Viewed: | 101 times | | Topic: | Catalog | | Status: | Open | |
|
| Does 3022 - plate 2x2 exist in Dark Green?
Studio indicates colour does not exist, but In BrickLink Catalog the 3022 exists
in Dark Green but there is none for sale....
Can this be confirmed please?
|
| Author: | Amstys | | Posted: | Mar 13, 2024 16:56 | | Subject: | Hips with Leather Belt (Red Studs) Pattern | | Viewed: | 111 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi there, I have a piece labeled "Hips with Leather Belt (Red Studs) Pattern"
Item No: 970p4f
Because Bricklink is deleting printed hips and individual legs I cannot find
out the legs that attach to these hips. Brickognize does not pick up the piece
either. I currently have plain black legs attached to them. If anyone knows the
correct part number for the hips and legs that would be much appreciated.
Thanks!
|
|
| Author: | Katsu | | Posted: | Mar 13, 2024 08:17 | | Subject: | Items 4643497 and 4643501 Ninjago Game Cards | | Viewed: | 55 times | | Topic: | Catalog | | Status: | Open | |
|
| Today I found out that these two cards and also some another from 2012 are missing
in catalog, I tried to add them into catalog, however there are already some
requested submissions from December, any idea how long it may take for them to
be added to catalog so I will be able to add them to my inventory ? I was looking
at catalog and there are also these cards with different numbers, referenced
as North American Version, however mine are International Version, so it would
be wrong to upload them as NA version and just write there it's International
Version.
|
|
|
| Author: | Jblotempio | | Posted: | Mar 10, 2024 18:02 | | Subject: | Flat minifigure heads | | Viewed: | 233 times | | Topic: | Catalog | | Status: | Open | |
|
| I haven't been able to find any information on the yellow Lego head with
no stud. In the indentation on top of the head, it is clearly marked Lego. I
have 4 of these mysterious entities and would like to know what they are. Thanks,
Jerri LoTempio of Donovan's Treasure Chest.
|
|
|
| Author: | aaronaar | | Posted: | Mar 8, 2024 20:05 | | Subject: | Catalog Statistics: Top Sold Items | | Viewed: | 102 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello! Under the reference catalog statistics, there is an option to see the
top sold items for the past 6 months. What I am most interested in is top parts
sold, but the problem is it only shows the top 100 parts (same for other categories).
Is there a way to see more than just top 100? The information is most definitely
tracked but it doesn’t look visible to normal users.
The page link is https://www.bricklink.com/catalogStatsSold.asp?orderNew=N&itemType=P
Thank you for any information!
Aaron
|
|
| Author: | thunderguff | | Posted: | Mar 6, 2024 18:09 | | Subject: | Space Police II logo misprint? | | Viewed: | 97 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi,
I appear to have a tile: 3068pb0029 - Tile 2 x 2 with Space Police II Logo Pattern,
with the red and green colours upside down. I can't see it as a variant in
any of the sets it appears in. I've looked through all the instructions and
it always appears with the red at the top and green on the bottom. Does anyone
know if this is just a misprint? or is this a different part?
Thanks
Dave
|
|
|
| Author: | j2_aurorayahoo | | Posted: | Mar 6, 2024 15:07 | | Subject: | difference in pieces | | Viewed: | 112 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi, I am new to Bricklink and am still learning how it works. I have many old
sets from my son, all from the late 90's and am trying to put them all together.
I have the instruction books for about 98% but am finding the books differ from
the set inventories on this site. For instance the Flame Chaser Helicopter #6531.
I have been using this reference to find all the pieces needed but now am concerned
that the instructions I have differ from the inventory I have been collecting.
Not really sure what my question is,, but am concerned the pieces don't
add up to the instruction books I have. I came online as some of the pieces were
difficult to see very well and was unsure of the colors needed. Why would these
differ from the instructions?
Hope this makes sense
|
|
| Author: | BricksHolland | | Posted: | Mar 6, 2024 08:02 | | Subject: | 6373 | | Viewed: | 108 times | | Topic: | Catalog | | Status: | Open | |
|
| set 6373 instructions show flags with wave right, maybe the box does too. I was
wondering what people found in the set when they openend it as new: wave right
or left. Inventory in general, parts lists, say that the flags for this set are
wave left. So is the photo on the first page of the instructions wrong or are
the parts lists wrong?
|
|
| Author: | Abrickadabra | | Posted: | Mar 4, 2024 16:12 | | Subject: | Newly merged items without variant notes | | Viewed: | 160 times | | Topic: | Catalog | | Status: | Open | |
|
| I noticed that newly merged part 44302 has no description summarising the variants
- I'm not sure if this is a common oversight on all the merged pieces as
I've only checked this one.
I'm used to seeing variant messages for parts that have "soft" variants
- why do these merges not have them? I'd argue they are clearly significant
variants worth noting if they used to be listed separately.
Cheers
|
| Author: | Sean_Stevens | | Posted: | Mar 4, 2024 11:51 | | Subject: | Stickers - I'd please | | Viewed: | 149 times | | Topic: | Catalog | | Status: | Open | |
|
| | Has anybody got an idea what set these are from please? |
|
| Author: | jennnifer | | Posted: | Mar 4, 2024 09:57 | | Subject: | Variant merge - clarification 553b/c | | Viewed: | 161 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello,
[p=553b]
I see that the old 553b Blocked Stud has been merged with the much newer 3626
Vented Stud.
Was I wrong in expecting that it was also to be merged with 553c Hollow Stud?
Wasn't the point to not have to differentiate between the different stud
types?
Thanks,
~Jen
|
| Author: | rbritton31 | | Posted: | Mar 3, 2024 10:29 | | Subject: | 65766c02 | | Viewed: | 94 times | | Topic: | Catalog | | Status: | Open | |
|
| I have this part in light bluish gray from set# 42107 but it is not listed with
this color...only in dark bluish gray. If someone can list it I can provide a
pic for it.
|
|
| Author: | Stuart9 | | Posted: | Mar 2, 2024 18:00 | | Subject: | 816 different wire | | Viewed: | 105 times | | Topic: | Catalog | | Status: | Open | |
|
| Just opened a sealed 816.
* | | 766c96 (Inv) Electric, Wire 12V / 4.5V with 2 Leads, 96 Studs Long with 2 Light Gray Electric, Connector, 2-Way Male Squared Narrow Long with Center Post (x466c96 / 766c01)
Parts: Electric, Wire & Connector |
This is shown as an alternative item in set 970-1
Contents as catalogue except one wire :
My 816 box contains :
1 x 766c28 light grey not 2.
1 x 766c96 light grey.
Can this be accepted as an alternative part entry for the wires ?
|
|
| Author: | here4bricks614 | | Posted: | Mar 2, 2024 16:46 | | Subject: | Seriously? | | Viewed: | 837 times | | Topic: | Catalog | | Status: | Open | |
|
| What was the point of merging 44302 and 54657? The other hinge bricks/plates?
All of the element numbers are gone and now it’s going to be harder to find the
specific variant.
This catalog project was a rushed and stupid idea.
Merging parts did not move element numbers over because the merging process doesn’t
come with that built into it. Was that something that site admin considered before
this bright idea? Nope. Why bother ensuring a smooth transition when you can
carry on without a plan in mind? After all, that seems to be par for site administration.
Listening to community complaints? A waste of time.
Improving site functionality? A bigger waste of time.
Considering that a project of this scale would undermine years of progress and
effort from your catalog administrators and community members? An even bigger
waste of time.
Then, catalog administrators and community members have to clean the mess up.
|
|
|
| Author: | Leftoverbricks | | Posted: | Mar 2, 2024 10:52 | | Subject: | about latest additions to minecraft minifigs | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
|
| I notice that the latest additions to the Minecraft minifigures were
and
What happened to min167?
|
|
| Author: | kpnuts67 | | Posted: | Mar 2, 2024 09:11 | | Subject: | Trans 2x2 bricks | | Viewed: | 114 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi
I've just finished sorting a joblot of old(ish) LEGO from a recent bulk purchase
(contains space police and other sets from the early 90s).
I noticed that all the 2x2 bricks in trans blue, green and red have no inner
supports but these colours are not listed as known colours for this variant.
I've had plenty of those with the supports but don't remember coming
across this variant before.
I'm assuming these are fairly common but what sets do they come from?
Regards
Kev
|
|
| Author: | BrickCompulsion | | Posted: | Mar 2, 2024 05:06 | | Subject: | sort the changes out please | | Viewed: | 101 times | | Topic: | Catalog | | Status: | Open | |
|
| HI Bricklink Team
Please can you either do the catalogue changes or not - I am listing a load of
printed tiles and some have the b and some don't. this is infuriating and
is meaning it is taking me longer to list than before.
I thought the changes were there to simplify matters. so far its the opposite
in every way plus we have a worse catalogue.
Also - and I fully admit I haven't been at my best the last few weeks due
to illness, but I thought we were getting an email with the parts in our inventory
it was affecting. Did I miss this ?
Cheers
Dave
|
|
| Author: | 1977_mauro | | Posted: | Mar 1, 2024 06:28 | | Subject: | Add alternate number 5711 for part 41747 | | Viewed: | 56 times | | Topic: | Catalog | | Status: | Open | |
|
| In the set:
a new version of right wedge 41747 appeared (but not for the left one)
The new part 5711 at the front in the comparison photo has no supports on the
inner sides like the older part has (at the back we can see the old version for
the left wedge)
Thansk Mauro
|
|
|
| Author: | Akir | | Posted: | Mar 1, 2024 05:13 | | Subject: | Stickered parts added | | Viewed: | 59 times | | Topic: | Catalog | | Status: | Open | |
|
| Hi all,
I just added two stickered parts for
to the catalogue - 45301pb056L and R. Unfortunately I have only one of them,
so no picture for the second. Would it be allowed to mirror the (L) pic I have
and use it for the R version?
Cheers,
Patrick
|
|
| Author: | GttiqwT | | Posted: | Mar 1, 2024 03:17 | | Subject: | Book# b20njol01en. Add Inventory request! | | Viewed: | 50 times | | Topic: | Catalog | | Status: | Open | |
|
| Hello there, just looking to see if the book listing "b20njol01en" can
get approved so I can add the inventory to it, as well so I can list it in my
store to sell!
Inventory consists of:
-1x njo514 (minifigure)
-1x 25111 flat silver
Thanks!
|
| Author: | thebrickwave | | Posted: | Feb 29, 2024 17:40 | | Subject: | King of the Dead wrong side torso | | Viewed: | 162 times | | Topic: | Catalog | | Status: | Open | |
|
| I have a wrong side torso King of the Dead from the LOTR Pirate Ship Ambush.
The arms are facing the wrong direction and I found a forum about it on Euro
Bricks but I haven't found any other information regarding how to price it
on Brick Link. Any help would be greatly appreciated.
Thanks!
|
|
| Author: | Saitobricks.ca | | Posted: | Feb 29, 2024 17:14 | | Subject: | Book variations | | Viewed: | 74 times | | Topic: | Catalog | | Status: | Open | |
|
| I'm trying to add a relationship for
[B=9780241011638uk]
[B=9781465436665us]
but I don't see a category for book variations.
Which category should I put the relationship under?
|
| Author: | user456730943 | | Posted: | Feb 29, 2024 14:32 | | Subject: | subthemes | | Viewed: | 77 times | | Topic: | Catalog | | Status: | Open | |
|
| there should be an option to include a subtheme as part of more than one theme.
for instance Studios: Jurassic Park III/Jurassic World: Jurassic Park III or
4 Juniors: Spider-Man/Super Heroes: Spider-Man
|
| Author: | Andrsv | | Posted: | Feb 29, 2024 14:03 | | Subject: | Does all headgear have lego logo? | | Viewed: | 126 times | | Topic: | Catalog | | Status: | Open | |
|
| I sold a ninjago headgear to a customer, and he claims it is not lego as it didnt
have a lego logo. The headgear was used, so there might be a chance that a non
lego part has been mixed in.
Does anyone know if there exist copies of 98133PB04 ? Should the original have
a lego logo? And in case it doesnt have a lego logo, how can we distinguish a
fake vs a real?
|
| Author: | heikoloogi | | Posted: | Feb 29, 2024 11:28 | | Subject: | Adding items to the catalog | | Viewed: | 79 times | | Topic: | Catalog | | Status: | Open | |
|
| Dear Catmins,
it's me again. I would really love to sell all the items which are currently
pending. If there are any issues I can help with, please tell me.
I have more items to come, so please help me adding them for sale.
|
|
| Author: | WOLKsite | | Posted: | Feb 28, 2024 15:07 | | Subject: | Rubber Bands & Piece Counts | | Viewed: | 108 times | | Topic: | Catalog | | Status: | Open | |
|
| So, this is sort of a wider-spread issue that would be adressed across several
sets, so I wanted to make one bigger post to adress this as I'm not sure
whether this should be handled through a note or through inventory changes, and
I want to ensure consistency.
I've noticed that several sets with SQUARE rubber bands, the set typically
includes twice the amount of rubber bands necessary to build the set, and these
are typically also included in the piece count listed on the box. However, on
Bricklink, these parts are handled inconsistently.
I've only looked at BIONICLE sets, for the time being.
The following contain 2 rubber bands in their piece count shown on the box, but
only uses one:
8545 Whenua already handles this through a note.
These are duplicates of the above sets but don't show a piece count:
Nui-Rama contains 8 rubber bands, but only 4 are used in the main model, and
2 in the alternate model. Box pcs is 138 - It erroneously excludes all 8 rubber
bands.
Strangely, on Bricks & Pieces, the pcs count is 294. In a LEGO Shop At Home catalogue
I've found, it is 246.
Muaka & Kane-ra contains 12 XS and 16 S rubber bands, but only 6 XS, respectively
8 S, are used in the main model, and 1 XS and 4 S in the alternate model. Box
pcs is 647.
Manas contains 8 rubber bands, but only 4 are used in the main model, and 6 in
the alternate model. Box pcs is 442.
The same LEGO Shop At Home catalogue mentioned for the Nui-Rama, however, shows
the count of 428 - not sure what's up there.
Nui-Jaga contains 8 rubber bands, but only 4 are used in the main model, and
4 in the alternate model. Box pcs is 218. Like Whenua, this one is already
noted.
Tarakava contains 8 rubber bands, but only 4 are used in the main model, and
2 in the alternate model. Box pcs is 401.
As a tangential addendum of notes to add:
Exo-Toa box pcs is 360, erroneously excluding the rubber bands.
Lewa Nuva box pcs is 36 - as already noted, all of the 38 pieces in the set are
used in the instructions one way or another, and Bricks & Pieces says 38 as well.
|
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
Belgium, Antwerpen
USA, Colorado
Canada, Ontario
Germany, Berlin
United Kingdom, England
Russia, Sverdlovsk
)
)
)
)
Poland, w. Mazowieckie
)
)
Italy, Lombardia
Sweden, Stockholm
)
)
Portugal
)
)
United Kingdom, Scotland
Netherlands, Overijssel
Switzerland, Bern
)
)
)
)
)
Slovakia, Trenčiansky Kraj
Spain, Comunidad Valenciana
Austria, Steiermark
)
)
Norway, Rogaland
