Redisplay Messages: Compact | Brief | All | Full Show Messages: All | Without Replies| Author: | SylvainLS  | | Posted: | May 14, 2024 04:47 | | Subject: | Re: Window 1x1x1 - part 39 image change | | Viewed: | 12 times | | Topic: | Catalog Requests | |
|
| In Catalog Requests, SRvanKlink writes:
| | I have a very strong feeling that part 39, window 1x1x1 carries a wrong image.
The parts is not identified as one with extended lip, though the part on the
image has.
Can someone confirm or tell me if I see it wrong?
Thanks
|
* |  | 39a Window 1 x 1 x 1 with Extended Lip and Solid Stud, no Glass
Parts: Window |
Seems to me 39 is the undetermined (umbrella) entry and all the variants have
an extended lip and only differ on the stud.
|
|
| Author: | phillwright | | Posted: | May 14, 2024 04:45 | | Subject: | (Cancelled) | | Viewed: | 6 times | | Topic: | Shipping | |
|
| In Shipping, Nubs_Select writes:
What does (Cancelled) mean in your reply?
|
| Author: | SylvainLS | | Posted: | May 14, 2024 04:41 | | Subject: | Re: Bricklink admins not responding | | Viewed: | 9 times | | Topic: | Problem Order | |
|
| In Problem Order, yorbrick writes:
| | […]
For your sake, you better hope they don't run a queuing system where the
last email received determines the order of response, like if you deal with emails
received in order of earliest received that hasn't been answered or updated.
|
Flooding is also a good way to end on a stoplist.
|
|
| Author: | SRvanKlink | | Posted: | May 14, 2024 04:37 | | Subject: | Window 1x1x1 - part 39 image change | | Viewed: | 20 times | | Topic: | Catalog Requests | | For: | Catalog Associate | | Status: | Open | |
|
| I have a very strong feeling that part 39, window 1x1x1 carries a wrong image.
The parts is not identified as one with extended lip, though the part on the
image has.
Can someone confirm or tell me if I see it wrong?
Thanks
|
|
| Author: | infinibrix | | Posted: | May 14, 2024 04:29 | | Subject: | Re: FIGURE SW0121 REMOVED | | Viewed: | 15 times | | Topic: | General | |
|
| In General, Nubs_Select writes:
| | In General, randyf writes:
| | In General, Nubs_Select writes:
| | In General, randyf writes:
| | In General, pitz8008 writes:
| | In General, randyf writes:
| | In General, peregrinator writes:
| | In General, pitz8008 writes:
| | This is what I had written in the description. "Comments: No hair, round
plate, lightsaber, doesn't light up. Rest of figure looks in good shape."
|
Do I understand correctly that the hair, round plate, and light saber were missing
from the minifig? If that's the case then I could see why it was removed
- 3-4 pieces out of a total of 7-8 were missing.
|
The main part is only one piece, so three of the four pieces of the figure were
missing. Once we have a chance to get the inventories for these figures into
the catalog, there will be no confusion over them.
|
Wel, the figures are only 19 years old.
|
Prior administrators would not let them be inventoried. The current team decided
to allow them to be inventoried later last year. All we are waiting for are good
images of the figures without all of the pieces that can come off easily. If
you would like to help with that, please do so.
|
I got 1 or 2 of them (I think obi wan (and maybe Anakin?)). If you need anything
specific please let me know
|
Read above. 
"All we are waiting for are good images of the figures without all of the
pieces that can come off easily."
|
I did but wasn’t sure what it meant  should I print them off and send them
to bricklink in the USA or make entires for the parts or something else
|
I wouldn’t bother.... Try to be helpful, Get an unhelpful response!
I’m not sure what it means either? I could try to guess but it’s certainly not
worded very clear!?
|
|
| Author: | msSquirrel | | Posted: | May 14, 2024 04:13 | | Subject: | Re: Inventory Change Request for Set 10556-1 | | Viewed: | 8 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, randyf writes:
| | In Inventories Requests, msSquirrel writes:
| | In Inventories Requests, msSquirrel writes:
| | Please make changes to the following inventory:
* Change 1 Part Yellow {62670 Duplo Propeller Rotor 3 Blade, 4 Diameter (Undetermined Type) to 62670a Duplo Propeller Rotor 3 Blade, 4 Diameter, Small Hole}
|
Hello!
In sets , , rotor are mounted on .
This part has a small propeller pin - this is clearly visible in the photo available
in the catalog, as well as attached below.
The difference in pin sizes is clearly visible in the example
and
Sincerely, Elena.
|
has three element numbers associated with it, which usually means that something
is changing. So, I went to see if this part had changed. Lo and behold, it had
(see image).
Therefore, the evidence for what sets had which version of the engine and which
version of the propeller are going to need much more evidence. All we know for
sure is that the engine clearly needs to be split into two versions and that
it is likely that a specific engine/propeller pair probably appeared in the same
set together.
Cheers,
Randy
|
I have never seen this part with a large pin. Looks by your photo, it really
exists. The part in the photo is taken from set 5594.
|
|
| Author: | randyf | | Posted: | May 14, 2024 04:01 | | Subject: | Re: Inventory Change Request for Set 10556-1 | | Viewed: | 6 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, msSquirrel writes:
| | In Inventories Requests, msSquirrel writes:
| | Please make changes to the following inventory:
* Change 1 Part Yellow {62670 Duplo Propeller Rotor 3 Blade, 4 Diameter (Undetermined Type) to 62670a Duplo Propeller Rotor 3 Blade, 4 Diameter, Small Hole}
|
Hello!
In sets , , rotor are mounted on .
This part has a small propeller pin - this is clearly visible in the photo available
in the catalog, as well as attached below.
The difference in pin sizes is clearly visible in the example
and
Sincerely, Elena.
|
has three element numbers associated with it, which usually means that something
is changing. So, I went to see if this part had changed. Lo and behold, it had
(see image).
Therefore, the evidence for what sets had which version of the engine and which
version of the propeller are going to need much more evidence. All we know for
sure is that the engine clearly needs to be split into two versions and that
it is likely that a specific engine/propeller pair probably appeared in the same
set together.
Cheers,
Randy
|
|
|
| Author: | yorbrick | | Posted: | May 14, 2024 03:51 | | Subject: | Re: Bricklink admins not responding | | Viewed: | 15 times | | Topic: | Problem Order | |
|
| In Problem Order, NicklasDK writes:
| | I wonder what happened to this site after Lego took over. Theres absolutely no
response whatsoever from the admins when requesting a NSS removed. I have been
trying for 2 months and send several messages to Them but nothing happens
Being a seller inhere for 10+ years this site here seems to turn into a moneymaking
joke for the team running it
I have decided now to send 10-20 e-mails a Day to Them with the same request
just to get a response. Absolutely madness I am forced to do like this JUST TO
GET A RESPONSE
|
For your sake, you better hope they don't run a queuing system where the
last email received determines the order of response, like if you deal with emails
received in order of earliest received that hasn't been answered or updated.
|
|
| Author: | msSquirrel | | Posted: | May 14, 2024 02:54 | | Subject: | Re: Inventory Change Request for Set 10556-1 | | Viewed: | 15 times | | Topic: | Inventories Requests | |
|
| In Inventories Requests, msSquirrel writes:
| | Please make changes to the following inventory:
* Change 1 Part Yellow {62670 Duplo Propeller Rotor 3 Blade, 4 Diameter (Undetermined Type) to 62670a Duplo Propeller Rotor 3 Blade, 4 Diameter, Small Hole}
|
Hello!
In sets , , rotor are mounted on .
This part has a small propeller pin - this is clearly visible in the photo available
in the catalog, as well as attached below.
The difference in pin sizes is clearly visible in the example
and
Sincerely, Elena.
|
|
|
| Author: | LegendaryConch | | Posted: | May 14, 2024 02:22 | | Subject: | New Custom Items and Minifigs! | | Viewed: | 31 times | | Topic: | Sales | |
|
| Hello everyone! I’ve just added some new Star Wars Custom Items and Series 25
Minifigs to my shop, so if you’re interested take a look!
Peace & May the Force be With You!
-Conch, Owner of The Little Minifig Shop
|
Next Page: 5 More | 10 More | 25 More | 50 More | 100 More
|
France, Nouvelle-Aquitaine
United Kingdom, England
Netherlands, Zuid-Holland
Russia, Moscow Region
USA, Ohio
